Straw Briquetting Line LBBP-600 - Briquetting Technology

COMPLETE STRAW AND RAPESEED BRIQUETTING LINE The complete briquetting line for straw and rapeseed is designed for a clear technological workflow, from raw material preparation through to the discharge of the finished briquettes from the press. The system produces 70–75–80 mm briquettes and is suitable for setting up a briquetting plant, depending on the operating conditions and the equipment configuration used in the line. The configuration integrates the essential equipment required for feeding, homogenization and briquetting, ensuring that straw processing takes place in a consistent and efficient production flow. The briquette density at the outlet of the briquetting press reaches up to 1,450 kg/m³, while the total installed power is 140 kW. Technical Specifications Production capacity: up to 600–900 kg/h, depending on the operating conditions and the equipment configuration used in the line. Briquette diameter: 70–75–80 mm Briquette density at press outlet: up to 1,450 kg/m³ Total installed power: 140 kW Power consumption: 50–70 kW/h Warranty: 24 months from commissioning of the straw briquette production line. Line Components The basic configuration includes the main equipment required for raw material feeding, homogenization and briquetting, ensuring that the raw material passes through all processing stages in a consistent and efficient workflow. Mechanical Straw Briquetting Press BriqTech Series – Model BT-070-800Max – 55 kW Mechanical briquetting press designed for the production of straw briquettes. Raw Material Homogenization Hopper Capacity: 3 m³ – 6 kW Designed to ensure uniform feeding and consistent homogenization of the raw material before the briquetting process. Straw Bale Chopping Complex CGS-1 – 80 kW System designed for the chopping and preparation of straw bales prior to further processing and briquetting. VAT Intra-Community supply – 0% VAT