Kuhn FC 9530 / 3525 R-FF

Used KUHN FC 9530 R-FF rear mower (butterfly) and KUHN FC 3525 R-FF front mower combination, year of manufacture 2024. The machines are in very good working condition and fully prepared for work. KUHN FC 9530 R-FF rear mower: Working width in combination with front mower: 9.53 m Overlap between front and rear mowers with 3.10 m front mower: 30–50 cm Overlap between front and rear mowers with 3.50 m front mower: 50–70 cm Transport width: 2.95 m Cutterbar: OPTIDISC ELITE Number of discs (individual mower width): 2 × 8 Quick-change blades: FAST-FIT Cutting height with standard skids: 35 to 65 mm Bearing protection with shear hub: PROTECTADRIVE Ground following system: pendulum type Suspension: LIFT-CONTROL hydropneumatic Non-stop protection system Conditioning system: SQUAREFLEX with two polyurethane rollers Conditioner speed: 780 rpm Average swath width: 2 × 1.85 / 2.4 m Wide spreading system: standard Headland management: hydraulic cylinder Function control: lifting and transport position Hitch: three-point linkage Cat. III and 4N Parking position: folded or unfolded on parking stands PTO speed: 1000 rpm Overload protection: standard Slip clutch: integrated in side skids Required tractor power: 154 kW / 210 HP Required tractor hydraulic connections: 2 double-acting Required tractor electrical connections: 1 × 7-pin socket Road lighting system: standard Rear mower weight: 3330 kg PTO shaft: 1 3/8" 6 Side skids for cutting height adjustment: 45–85 mm KUHN FC 3525 R-FF front mower: Working width: 3.5 m Transport width: 3.48 m Cutterbar: OPTIDISC ELITE Number of discs with protective skids: 8 Blade fastening: FAST-FIT quick-change Cutting height with standard skids: 35 to 65 mm Top-access disc removal: standard Cutterbar protection system with shear hub: PROTECTADRIVE Ground following system: pivoting link arms Suspension: LIFT-CONTROL hydropneumatic Conditioner: SQUAREFLEX with two polyurethane rollers Conditioner speed: 780 rpm Conditioner drive with anti-blocking system Approximate swath width: 1.4 to 2.0 m Headland turning system: hydraulic cylinder Hitch: three-point linkage Cat. II PTO speed: 1000 rpm (clockwise viewed from tractor cab) Slip clutch integrated in gearbox: standard Theoretical required tractor power: 57 kW / 77 HP Required tractor hydraulic connections: 1 single-acting Required tractor electrical connections: 1 × 7-pin socket Outline lighting: standard Approximate weight: 1390 kg PTO shaft: 1 3/8" 6 Side skids for cutting height adjustment: 45–85 mm Machines located in Kaunas, Lithuania