Blog de noticias Mascus
Número de anuncios: 423

Cargadoras Caterpillar 930 de segunda mano

A continuación se muestran todos los anuncios clasificados de segunda mano de cargadoras, accesorios e implementos disponibles para su venta. Puede ordenarlos por año de producción, precio, horas de uso o país. Para mejorar su búsqueda, puede utilizar los filtros de la izquierda.
Leer más sobre Caterpillar en la sección de marcas.

Más información Cerrar
Filtro actual
anuncios/página
  • Caterpillar 930 H, 2009, Cargadoras sobre ruedasCaterpillar 930 HTipo de carrocería: Articulado, Accesorios: ENGANCHE RAPIDO CAZO DE ALTO VOLTEO RUEDAS MACIZAS ORIGINALES

    Cargadoras sobre ruedas
    2009 21.000 h
    España, EL CASAR, GUADALAJARA

    27.000 EUR
  • Caterpillar 930 K, 2013, Cargadoras sobre ruedasCaterpillar 930KMás información: CODE 4 TIREUC

    Cargadoras sobre ruedas
    2013 7.568 h
    España, Central-madrid

    82.500 EUR
  • Caterpillar 930, 1970, Cargadoras sobre ruedasCaterpillar 930Más información: PALA CARGADORA CATERPILLAR 930 EN MUY BUEN ESTADO.

    Cargadoras sobre ruedas
    1970
    España

    Precio a consultar
  • Caterpillar 930, TransmisiónCaterpillar 930Estado general (de 1 a 5): 5

    Transmisión

    España

    Precio a consultar
  • Caterpillar 930, 2016, Cargadoras sobre ruedasCaterpillar 930MMás información: CODE TIREUC

    Cargadoras sobre ruedas
    2016 7.215 h
    España, Barcelona

    87.000 EUR
  • Caterpillar 930 G, 2006, Cargadoras sobre ruedasCaterpillar 930 GPeso bruto: 13500, Dimensiones de transporte (LaxAnxAl): 7.4x2.46x3.28

    Cargadoras sobre ruedas
    2006 22.566 h
    Portugal, Casal da Fisga, Rio Maior

    43.500 EUR
  • Caterpillar 930 K, 2015, Cargadoras sobre ruedasCaterpillar 930 K

    Cargadoras sobre ruedas
    2015 7.171 h
    Portugal, Italy

    Precio a consultar
  • Caterpillar 930 H, 2008, Cargadoras sobre ruedasCaterpillar 930 H

    Cargadoras sobre ruedas
    2008
    Portugal, NEGRAIS, SINTRA, LISBOA

    Precio a consultar
  • Caterpillar 930 K, 2015, Cargadoras sobre ruedasCaterpillar 930 K

    Cargadoras sobre ruedas
    2015 6.108 h
    Portugal, Italy

    Precio a consultar
  • Caterpillar 930 K, 2015, Palas cargadorasCaterpillar 930K

    Palas cargadoras
    2015 7.171 h
    Italia

    Precio a consultar
  • Caterpillar 930 K, 2013, Cargadoras sobre ruedasCaterpillar 930 K

    Cargadoras sobre ruedas
    2013 3.140 h
    Italia

    79.000 EUR
  • Caterpillar 930 H, 2011, Cargadoras sobre ruedasCaterpillar 930H

    Cargadoras sobre ruedas
    2011 8.478 h
    Italia, Pero

    Precio a consultar
  • Caterpillar 930 H, 2011, Cargadoras sobre ruedasCaterpillar 930H

    Cargadoras sobre ruedas
    2011 2.684 h
    Italia

    Precio a consultar
  • Caterpillar 930, 2016, Palas cargadorasCaterpillar 930M

    Palas cargadoras
    2016 3.808 h
    Italia

    Precio a consultar
  • Caterpillar 930 K, 2014, Cargadoras sobre ruedasCaterpillar 930K

    Cargadoras sobre ruedas
    2014 2.999 h
    Italia

    Precio a consultar
  • Caterpillar 930, 2007, Cargadoras sobre ruedasCaterpillar 930

    Cargadoras sobre ruedas
    2007 24.680 h
    Italia, San Marco Evangelista

    Precio a consultar
  • Caterpillar 930, 2007, Cargadoras sobre ruedasCaterpillar 930

    Cargadoras sobre ruedas
    2007 26.774 h
    Italia, San Marco Evangelista

    Precio a consultar
  • Caterpillar 930 H, 2012, Cargadoras sobre ruedasCaterpillar 930H

    Cargadoras sobre ruedas
    2012 4.317 h
    Italia

    Precio a consultar
  • Caterpillar 930 K, 2013, Cargadoras sobre ruedasCaterpillar 930K

    Cargadoras sobre ruedas
    2013 3.355 h
    Francia, Limoges / Boisseuil, 87

    Precio a consultar
  • Caterpillar 930 K, 2015, Cargadoras sobre ruedasCaterpillar 930K

    Cargadoras sobre ruedas
    2015 8.150 h
    Francia, Aix-en-provence, 13

    Precio a consultar
Página
Crear alerta mail
Caterpillar 930 specs

  • Caterpillar 930M Aggregate Handler (2016)

    Specifications
    Engine
    427 cu in
    4 in
    5 in
    Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
    Cat C7.1 ACERT
    * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Spark arrester performance as standard Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
    164 hp
    157 hp
    166 hp
    1800 rpm
    164 hp
    164 hp
    166 hp
    157 hp
    160 hp
    162 hp
    592 lb ft
    566 lb ft
    572 lb ft
    1600 rpm
    160 hp
    162 hp
    154 hp
    156 hp
    158 hp
    592 lb ft
    566 lb ft
    572 lb ft
    Operational
    31144 lb
    Power Train
    Fixed
    Oscillating
    Limited slip differential
    Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
    Offset rims available to meet European roading requirements.
    **Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
    Spring applied hydraulically released
    Inboard wet disc
    Locking differential (standard)
    10.5 degrees
    Transmission
    * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
    Steering
    3500 psi
    2.8 in
    1.6 in
    17.2 in
    37155 lb ft
    34 gal/min
    27747 lb ft
    2.8 s
    2.4 s
    Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Transmission
    1-13 km/h (0.6-8 mph)
    8 mph
    17 mph
    25 mph
    Buckets
    2.5-2.7 m3 (3.3-3.5 yd3)
    Operating Specifications
    19563 lb
    Service Refill Capacities
    7.9 gal
    51.5 gal
    23.8 gal
    43.6 gal
    5.3 gal
    2.2 gal
    5 gal
    6.9 gal
    6.6 gal
    Cab
    ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
    * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
    The Blue Angel environmental label is an optional attachment for Europe only.
    Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
    Loader Hydraulic System
    28.7 in
    21.9 in
    50 gal/min
    Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
    * 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
    3626 psi
    4.7 in
    2.6 in
    5.9 in
    3.5 in
    4061 psi
    3626 psi
    4061 psi
    50 gal/min
    5.1/5.7 seconds
    1.5/1.7 seconds
    2.7/2.7 seconds
    9.3/10.1 seconds

  • Caterpillar 930M (2014)

    Specifications
    Engine
    427 cu in
    4 in
    5 in
    Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
    Cat C7.1 ACERT
    * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Spark arrestor performance as standard Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
    164 hp
    157 hp
    166 hp
    1800 rpm
    164 hp
    164 hp
    166 hp
    157 hp
    160 hp
    162 hp
    592 lb ft
    566 lb ft
    572 lb ft
    1600 rpm
    160 hp
    162 hp
    154 hp
    156 hp
    158 hp
    592 lb ft
    566 lb ft
    572 lb ft
    Operational
    30879 lb
    Power Train
    Fixed
    Oscillating
    Locking differential
    Limited slip differential
    Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
    Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
    Spring applied hydraulically released
    Inboard wet disc
    10.5 degrees
    7 degrees
    Transmission
    * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
    Steering
    3500 psi
    2.8 in
    1.6 in
    17.2 in
    37155 lb ft
    34 gal/min
    27747 lb ft
    2.8 s
    2.4 s
    Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Transmission
    1-13 km/h (0.6-8 mph)
    8 mph
    17 mph
    25 mph
    Buckets
    2.1-5.0 m3 (2.7-6.5 yd3)
    Operating Specifications
    18670 lb
    Service Refill Capacities
    7.9 gal
    51.5 gal
    23.8 gal
    43.6 gal
    5.3 gal
    2.2 gal
    5 gal
    6.9 gal
    6.6 gal
    Cab
    ISO 3471: 2008
    ISO 3449: 2005 LEVEL II
    Declared sound levels per ISO 6396:2008* while in Performance Power Mode: Standard cab: 68 3 dB(A) and Deluxe cab
    * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
    Loader Hydraulic System
    28.7 in
    21.9 in
    50 gal/min
    * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
    Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    3626 psi
    4.7 in
    2.6 in
    5.9 in
    3.5 in
    4061 psi
    50 gal/min
    5.1/5.7 seconds
    1.5/1.7 seconds
    2.7/2.7 seconds
    9.3/10.1 seconds
    42 gal/min
    3626 psi
    4061 psi
    Air Conditioning System
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

  • Caterpillar 930G

    Dimentions
    Dimensions
    1.3812 ft in
    25.8432 ft in
    9.5144 ft in
    Specifications
    Engine
    1
    Caterpillar
    3056E DIT
    150.1945 hp
    160.9226 hp
    2300 rpm
    80
    366.1426 cu in
    3.937 in
    5 in
    Operational
    29039.2873 lb
    59.4387 gal
    33.0215 gal
    10.5669 gal
    9.1139 gal
    6.8685 gal
    6.6043 gal
    17.2474 ft in
    Transmission
    4
    3
    38 mph
    24 mph

  • Caterpillar 930K

    Dimentions
    Dimensions
    12.8 ft in
    1.5 ft in
    4.9 ft in
    3.8 in
    49 degrees
    9.25 ft in
    2.2 ft in
    10.9 ft in
    6.5 ft in
    16.8 ft in
    24.66 ft in
    45 degrees
    54 degrees
    3.4 ft in
    9.8 ft in
    Specifications
    Engine
    6
    2236
    C7.1 ACERT
    152 hp
    154 hp
    580 lb ft
    402 cu in
    551 lb ft
    4 in
    5 in
    156 hp
    154 hp
    154 hp
    156 hp
    Operational
    28948 lb
    51.5 gal
    43.6 gal
    8.5 gal
    2.2 gal
    6.9 gal
    6.9 gal
    20.5
    Transmission
    4
    4
    25 mph
    25 mph
    8 mph
    8 mph
    Steering
    40 degrees
    2.8 in
    3500 psi
    40 degrees
    Transmission
    8 mph
    17 mph
    25 mph
    25 mph
    Weights
    30479 lb
    Tires
    20.5 R25, radial (L-3)
    Buckets
    2.1 m3 - 5.0 m3 2.7 yd3 - 6.5 yd3
    Hydraulic System
    3626 psi
    50 gal/min
    5.7 sec
    1.7 sec
    2.7 sec
    Operating Specifications
    18444 lb
    40 degrees
    3.4 ft in
    9.25 ft in
    Service Refill Capacities
    7.9 gal
    51.5 gal
    5.3 gal
    23.8 gal
    43.6 gal
    2.2 gal
    6.9 gal
    6.6 gal
    Cab
    SAE J1040 MAY94, ISO 3471-1994
    SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
    Loader Hydraulic System
    50 gal/min
    3626 psi
    5.1 s
    1.5 s
    2.7 s
    9.3 s
    4.7 in
    28.7 in
    5.9 in
    21.9 in
    9.3 sec

  • Caterpillar 930G

    Dimentions
    Dimensions
    24.2749 ft in
    8.0545 ft in
    10.7546 ft in
    9.5144 ft in
    1.2 ft in
    13.2841 ft in
    9.5997 ft in
    12.7592 ft in
    3.937 ft in
    22.4311 ft in
    25.3806 ft in
    7.2999 ft in
    5.8661 ft in
    10.5 ft in
    85.2 in
    10.4 ft in
    2.1 ft in
    9.1 ft in
    11.5 ft in
    45 degrees
    6.4 ft in
    5 in
    25.1378 ft in
    4.7 ft in
    16.9 ft in
    16.9 ft in
    23.6 ft in
    51 degrees
    50 degrees
    58 degrees
    3.5499 ft in
    3.6 ft in
    9.2 ft in
    9.2 ft in
    1.2 ft in
    8 ft in
    12.6 ft in
    Specifications
    Engine
    2236
    366 in
    160.9226 hp
    150.1945 hp
    366.1425 cu in
    3.94 in
    5 in
    149 hp
    159 hp
    161 hp
    161 hp
    149 hp
    150 hp
    150 hp
    159 hp
    Operational
    27963.4349 lb
    59.4387 gal
    10.5669 gal
    4.2268 gal
    9.1139 gal
    6.8685 gal
    6.6043 gal
    33.0215 gal
    17.2474 ft in
    24 V
    80 amps
    20833.6849 lb
    15943.8317 lb
    8212.2197 lb
    20.5R25
    Transmission
    countershaft
    4
    3
    23.6121 mph
    15.5343 mph
    4.5 mph
    4.5 mph
    Steering
    40 degrees
    207 in
    2.75 in
    17.6 gal/min
    3500 psi
    40 degrees
    Transmission
    7.6 mph
    15 mph
    23.8 mph
    Weights
    28725 lb
    Tires
    7.9 ft in
    17.5-25 12PR L-2
    Weights
    1036.17 lb
    29044 lb
    Buckets
    2.1 m3 - 5.0 m3 2.6 yd3 - 6.5 yd3
    8.37 ft in
    Hydraulic System
    variable-displacement axial piston
    3756.481 psi
    58.1179 gal/min
    5 sec
    1.7 sec
    2.8 sec
    Bucket
    30349.2075 lb
    Blade
    8.3661 ft in
    Bucket
    2.7467 yd3
    2.2235 yd3
    Axles
    11 degrees
    Operating Specifications
    18029 lb
    9.3 ft in
    40 degrees
    3.52 ft in
    9.64 ft in
    Service Refill Capacities
    10.6 gal
    59.4 gal
    4.2 gal
    18.5 gal
    33 gal
    9.1 gal
    6.9 gal
    6.6 gal
    Cab
    SAE J1040 MAY94, ISO 3471-1994
    SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
    Loader Hydraulic System
    58 gal/min
    58 gal/min
    3755 psi
    5 s
    1.7 s
    2.8 s
    9.5 s
    4.5 in
    30.6 in
    6 in
    37 in
    9.5sec
    3755 psi