Matec MAGNUM FP2000X2000
Precio sin IVA
Imprimir
INFORMACIÓN
Grupo de productos
Construcción - Otros
Marca / modelo
Matec MAGNUM FP2000X2000
Año de fabricación
2018
Estado
Usada
Ubicación
Langley, British Columbia
País
Canadá
Mascus ID
AF3131FC
PRECIO
Seleccione una moneda
DETALLES
Referencia
114324
Más información
2018 Matec MAGNUM FP2000X2000 Filter Press System – Fluid Handling Equipment Water Treatment
Title: Filter Press System MAGNUM FP2000X2000
SKU: 114324
Model: MAGNUM FP2000X2000
Year: 2018
Condition: Used
S/N: 18202001 - 18202002
[PDF INSTALLATION MANUAL](... MAGNUM FILTER PRESS DATA SHEET](... Process
- The actual filtration process occurs in the filter pack, consisting of a customized set of plates.
- The cloths and under-cloths cover the filtrating surface of the plate, which has small projecting cylinders forming drainage channels.
- Once the filter pack is completely sealed, the filtration process begins from the head plate with the feed pump injecting the sludge into the filter plates chambers.
- The cake will form uniformly all across the filtrating surface and is ready for discharging once the required moisture level has been reached.
Magum Filter Presses
- Qty: 2
- System Voltage: 575 V, 60 Hz
- Length: 14210 mm
- Width: 3430 mm
- Foot Wheelbase Length: 12070 mm
- Foot Wheelbase Width: 1356 mm
- Total Height: 3795 mm
- Weight: approx. 57500 kg each
- Chamber Volume: 115 L
- Capacity Per Cycle: 11500 L
- Cu. m/h (2 cycles): 23.00
- Ton/h (2 cycles): 42.55
- Cu. m/h (3 cycles): 34.50
- Ton/h (3 cycles): 63.83
Model: MAGNUM FP2000X2000/100 NEWTT HTP
- 100 plates CH32,5 (plates CH30 (recessed) e CH35 (membrane))
- Closed loop discharge
- New TT
- Centralina
- Shakers
- Real Wash
- Core blow
- Drip tray
- Framing of the structure
- Pressure: 21 bar
- Tension: 575V 60Hz
- PLC: Allen Bradley
Model: MAGNUM FP2000X2000/101 NEWTT HTP
- 101 plates CH30 (Plates both CH35 e CH25) Membrane
- Open discharge
- New TT
- Hydraulic unit
- Shakers
- Real Wash
- Core blow
- Manifold discharge with valves and tray
- Framing of the structure
- squeezing kit (pump + piping)
- Pressure: 21 bar
- Tension: 575V 60Hz
- PLC: Allen Bradley
NOTE: The ton/h and cu. m/h data above are calculated on a material specific weight of 1.85 and a 35 mm cake thickness
Additional
- 6 - Stainless steel tanks
- 1 - Smaller stainless steel tank
- 2 - Large receiver air tanks (2019)
- 1 - Bilton insulated tank, large
- 1 - Bilton insulated tank, small
- Pumps & actuators
- All electrical / transformers
Lenmark Industries Ltd
27576 51a Ave V4W 4A9 Langley British Columbia Canadá
2
Años en MascusRecibir notificación por correo electrónico
